unisonic technologies co., ltd LIS05AF-30 i nfrared lamp led www.unisonic.com.tw 1 of 4 copyright ? 2008 unisonic technologies co., ltd qw-r125-021.a LIS05AF-30 ? description the utc LIS05AF-30 is kind of a infrared lamp led which is specially applicatted for the lamp. the features include: free air transmission system, opto-electronic switch and floppy disk drive. ? features * with infrared applied system * internal smoke detector ? ordering information ordering number LIS05AF-30
LIS05AF-30 i nfrared lamp led unisonic technologies co., ltd 2 of 4 www.unisonic.com.tw qw-r125-021.a ? absolute maximum rating parameter symbol ratings unit reverse voltage v r 5 v forward current i f 20 ma peak forward current (note 2) i fm 1000 ma power dissipation p d 150 mw operation temperature t a -30~+65 lead soldering temperature (note 3) t sd 260 storage temperature t stg -40~+80 note: 1. 2. 3. absolute maximum ratings are those values beyo nd which the device could be permanently damaged. absolute maximum ratings are stress ratings only an d functional device operat ion is not implied. ifp conditions----pulse width 100s and duty 1%.(pulse test) t 5s,to shell 2mm ? electrical characteristics (t a =25 , unless otherwise specified) parameter symbol test conditions min typ ma x unit forward volta g e v f i f =20ma 1.1 1.5 v reverse current i r vr=5v 0 10 p i f =20ma 850 nm s p ectral radiation bandwidth i f =20ma 45 nm viewin g an g le 2 1/2 30 de g rise time t r i f =20ma 2
LIS05AF-30 i nfrared lamp led unisonic technologies co., ltd 3 of 4 www.unisonic.com.tw qw-r125-021.a ? typical characteristics
LIS05AF-30 i nfrared lamp led unisonic technologies co., ltd 4 of 4 www.unisonic.com.tw qw-r125-021.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
